Thermo Particle Technology

    网站首页 > 产品展示 > 荧光微粒

      Dyed Red 红色荧光微粒溶液

      ImprovesensitivityanddetectabilityforanalyticalmethodswithThermoScientific™Fluoro-MaxRedAqueousFluorescentParticles,microspheresuspensionsthatareinternallydyedandfeaturebright,high-contrastcolor

      1. 详细信息

      Improve sensitivity and detectability for analytical methods with Thermo Scientific™ Fluoro-Max Red Aqueous Fluorescent Particles, microsphere suspensions that are internally dyed and feature bright, high-contrast colors.

       

      Fluoro-Max fluorescent particles emit bright and distinct colors when illuminated by the light of shorter wavelengths than the emission wavelength, improving their contrast and visibility relative to background materials.These internally dyed polymer particles utilize the exclusive Firefli™ process to incorporate the dye throughout the polymer matrix to produce bright fluorescent colors, minimize photo bleaching and prevent dye leaching into aqueous media.

      Features:
       

      • Made of polystyrene (PS), which has a density of 1.05g/cm3 and a refractive index of 1.59 @ 589nm (25°C)
      • Aqueous suspensions are packaged as 1% solids
      • Can be detected with an epifluorescence microscope, confocal microscope, fluorometer, fluorescence spectrophotometer or fluorescence activated cell sorter
      • Can also be detected using mineral light or black light (UV)

       

      Note:
      Spectral information is approximate and for reference only. Spectral properties of the dyes are dependent on their concentration and physical environment. The exact excitation and emission maxima may vary depending on the size and composition of the particles.

      Recommended for:

      • Filter testing
      • Flow tracing
      • Biological research

       

      MSDS下载

      Evaluating Pore Sizes of Biological Membranes with Fluorescent Microspheres

      Particle Retention Testing of 0.05 to 0.5 Micrometer Membrane Filters

       

       

      目录号
      平均直径(公制)
      容积(公制)
      R0100
      1.0µm
      10mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 1.0µm
      标称直径(公制) 1.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 1.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 10mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R0100B
      1.0µm
      60mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 1.0µm
      标称直径(公制) 1.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 1.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 60mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R0200
      2.0µm
      10mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 2.0µm
      标称直径(公制) 2.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 2.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 10mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R0200B
      2.0µm
      60mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 2.0µm
      标称直径(公制) 2.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 2.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 60mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R0300
      3.0µm
      10mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 3.0µm
      标称直径(公制) 3.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 3.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 10mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R0300B
      3.0µm
      60mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 3.0µm
      标称直径(公制) 3.0µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 3.0µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 60mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R100
      0.10µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.10µm
      标称直径(公制) 0.10µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.10µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <10%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R100B
      0.10µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.10µm
      标称直径(公制) 0.10µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.10µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <10%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R160
      0.16µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.16µm
      标称直径(公制) 0.16µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.16µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <10%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R200
      0.20µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.20µm
      标称直径(公制) 0.20µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.20µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R200B
      0.20µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.20µm
      标称直径(公制) 0.20µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.20µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R25
      0.025µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.025µm
      标称直径(公制) 0.025µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.025µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <20%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R25B
      0.025µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.025µm
      标称直径(公制) 0.025µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.025µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <20%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R300
      0.30µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.30µm
      标称直径(公制) 0.30µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.30µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R300B
      0.30µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.30µm
      标称直径(公制) 0.30µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.30µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R400
      0.40µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.40µm
      标称直径(公制) 0.40µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.40µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R400B
      0.40µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.40µm
      标称直径(公制) 0.40µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.40µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <5%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R50
      0.05µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.05µm
      标称直径(公制) 0.05µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.05µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <15%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R500
      0.50µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.50µm
      标称直径(公制) 0.50µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.50µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R500B
      0.50µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.50µm
      标称直径(公制) 0.50µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.50µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R50B
      0.05µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.05µm
      标称直径(公制) 0.05µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.05µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <15%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R60
      0.06µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.06µm
      标称直径(公制) 0.06µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.06µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <10%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R600
      0.60µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.60µm
      标称直径(公制) 0.60µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.60µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R600B
      0.60µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.60µm
      标称直径(公制) 0.60µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.60µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R60B
      0.06µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.06µm
      标称直径(公制) 0.06µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.06µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <10%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R700
      0.70µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.70µm
      标称直径(公制) 0.70µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.70µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R700B
      0.70µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.70µm
      标称直径(公制) 0.70µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.70µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R800
      0.80µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.80µm
      标称直径(公制) 0.80µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.80µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R800B
      0.80µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.80µm
      标称直径(公制) 0.80µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.80µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R900
      0.90µm
      15mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.90µm
      标称直径(公制) 0.90µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.90µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 15mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)
      R900B
      0.90µm
      90mL
      添加剂 Trace amounts of surfactant to inhibit agglomeration and promote stability
      颜色 Red
      组成 Polystyrene
      浓度 1% solids
      目录 Dyed polystyrene particles in water
      平均直径(公制) 0.90µm
      标称直径(公制) 0.90µm
      染料类型 Firefli Fluorescent Red (542/612nm)
      包括 Package Insert Sheet
      粒子密度 1.05g/cm³
      粒径 0.90µm
      稳定性 Product stable for a minimum of 24 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer. Product comes with stir bar for continual mixing duriong sampling.
      均匀性 <3%
      容积(公制) 90mL
      数量 1 ea.
      折射率 1.59 at 589nm (25°C)