Thermo Particle Technology

    网站首页 > 产品展示 > 标准尺寸微粒

      SURF-CAL™ Particle Size Standards

      SimplifythepreparationofcalibrationwaferswithThermoScientific™SURF-CAL™ParticleSizeStandards,forcalibrationandmaintenanceofScanningSurfaceInspectionSystems(SSIS).Availableparticlesizescorr

      1. 详细信息

      Simplify the preparation of calibration wafers with Thermo Scientific™ SURF-CAL™ Particle Size Standards, for calibration and maintenance of Scanning Surface Inspection Systems (SSIS). Available particle sizes correspond to the calibration point sizes required by instrument manufacturers.

       

      Thermo Fisher Scientific™, along with the Semiconductor Industry and SEMI, have established specific particle sizes to be used when calibrating Scanning Surface Inspection Systems. Working with instrument manufacturers, we created the SURF-CAL™ product line to meet SEMI standard guidelines.

      • Available sizes are considered to be critical sizing nodes as defined by the International Technology Roadmap for Semiconductors (ITRS).
      • By depositing SURF-CAL™ NIST™ traceable polystyrene latex spheres (PSL) on specially selected wafers, you can perform periodic calibration checks and compare your scanner with scanners at other locations.
      • You can also assess the performance of your SSIS at critical stages in the manufacturing process.
      • All products are suspended in deionized, filtered water in 50mL bottles at a concentration of 3 × 108 particles per mL.

      Note:

      Products PD1100 and smaller are also available at 1010 particles per mL for applications using the aid of a Differential Mobility Analyzer (DMA) or other size exclusionary techniques.

       

       

      MSDS下载

       

       

       

      目录号
      浓度
      直径(公制)
      PD-047
      3 x 108 particles/mL
      0.047µm
      
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.047µm
      直径(公制) 颗粒 0.047µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-047B
      1 x 10¹° particles/mL
      0.047µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.047µm
      直径(公制) 颗粒 0.047µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-064
      3 x 108 particles/mL
      0.064µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.064µm
      直径(公制) 颗粒 0.064µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-064B
      1 x 10¹° particles/mL
      0.064µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.064µm
      直径(公制) 颗粒 0.064µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-083
      3 x 108 particles/mL
      0.083µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.083µm
      直径(公制) 颗粒 0.083µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-083B
      1 x 10¹° particles/mL
      0.083µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.083µm
      直径(公制) 颗粒 0.083µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-092
      3 x 108 particles/mL
      0.092µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.092µm
      直径(公制) 颗粒 0.092µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-092B
      1 x 10¹° particles/mL
      0.092µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.092µm
      直径(公制) 颗粒 0.092µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-100
      3 x 108 particles/mL
      0.100µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.100µm
      直径(公制) 颗粒 0.100µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-100B
      1 x 10¹° particles/mL
      0.100µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.100µm
      直径(公制) 颗粒 0.100µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD1100
      3 x 108 particles/mL
      1.112µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 1.112µm
      直径(公制) 颗粒 1.112µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.011µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD1100B
      1 x 10¹° particles/mL
      1.112µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 1.112µm
      直径(公制) 颗粒 1.112µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.011µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-125
      3 x 108 particles/mL
      0.126µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.126µm
      直径(公制) 颗粒 0.126µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-125B
      1 x 10¹° particles/mL
      0.126µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.126µm
      直径(公制) 颗粒 0.126µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-155
      3 x 108 particles/mL
      0.155µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.155µm
      直径(公制) 颗粒 0.155µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-155B
      1 x 10¹° particles/mL
      0.155µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.155µm
      直径(公制) 颗粒 0.155µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD1600
      3 x 108 particles/mL
      1.57µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 1.57µm
      直径(公制) 颗粒 1.57µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.016µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-200
      3 x 108 particles/mL
      0.202µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.202µm
      直径(公制) 颗粒 0.202µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD2000
      3 x 108 particles/mL
      2.01µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 2.01µm
      直径(公制) 颗粒 2.01µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.019µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-200B
      1 x 10¹° particles/mL
      0.202µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.202µm
      直径(公制) 颗粒 0.202µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-204
      3 x 108 particles/mL
      0.204µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.204µm
      直径(公制) 颗粒 0.204µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-204B
      1 x 10¹° particles/mL
      0.204µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.204µm
      直径(公制) 颗粒 0.204µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-215
      3 x 108 particles/mL
      0.220µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.220µm
      直径(公制) 颗粒 0.22µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-215B
      1 x 10¹° particles/mL
      0.220µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.220µm
      直径(公制) 颗粒 0.22µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.003µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD3000
      3 x 108 particles/mL
      3.04µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 3.04µm
      直径(公制) 颗粒 3.04µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.026µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-305
      3 x 108 particles/mL
      0.304µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.304µm
      直径(公制) 颗粒 0.304µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-305B
      1 x 10¹° particles/mL
      0.304µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.304µm
      直径(公制) 颗粒 0.304µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.004µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-365
      3 x 108 particles/mL
      0.360µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.360µm
      直径(公制) 颗粒 0.360µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.005µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-365B
      1 x 10¹° particles/mL
      0.360µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.360µm
      直径(公制) 颗粒 0.360µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.005µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-500
      3 x 108 particles/mL
      0.498µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.498µm
      直径(公制) 颗粒 0.498µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.006µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-500B
      1 x 10¹° particles/mL
      0.498µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.498µm
      直径(公制) 颗粒 0.498µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.006µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-800
      3 x 108 particles/mL
      0.809µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.809µm
      直径(公制) 颗粒 0.809µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.006µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-800B
      1 x 10¹° particles/mL
      0.809µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.809µm
      直径(公制) 颗粒 0.809µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.006µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-802
      3 x 108 particles/mL
      0.802µm
       
      添加剂 None
      组成 Polystyrene
      浓度 3 x 108 particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles for calibration and maintenance of Scanning Surface Inspection Systems (SSIS)
      直径(公制) 0.802µm
      直径(公制) 颗粒 0.802µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.009µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.
      PD-802B
      1 x 10¹° particles/mL
      0.802µm
       
      添加剂 None
      组成 Polystyrene
      浓度 1 x 10¹° particles/mL
      目录 Polystyrene microspheres in deionized, filtered water
      描述 Particles For calibration and maintenance of Scanning Surface Inspection Systems (SSIS).
      直径(公制) 0.802µm
      直径(公制) 颗粒 0.802µm
      包括 Certificate of Calibration and Traceability to NIST
      材料 Polystyrene
      粒子密度 1.05g/cm³
      数量 50mL
      折射率 1.59 at 589nm (25°C)
      规格分布 0.009µm
      稳定性 Product stable for a minimum of 12 months
      储存要求 Unless otherwise stated, refrigerate (2° to 8°C) product when not in use but do not freeze. Store upright and keep bottle tightly sealed. Mix product with gentle inversion by hand or vortex mixer.